Expert Tips and Solutions for Planer Snipe

- The Planer Snipe Blog -

Welcome to the Planer Snipe blog, your go-to resource for all things related to planer snipe, woodworking tips, and tools! Here, you'll find expert advice, detailed tutorials, and insights into how to optimize your planer for smooth, snipe-free results. Whether you're a beginner or an experienced woodworker, our posts will help you solve common planer issues, improve your workflow, and enhance your woodworking projects. Explore our latest blog posts below and start crafting with confidence!

Learn About Snipe in Woodworking

Your DW735 Crank Got Hard to Turn. Stop Cranking.

Jan Schwarte

If the height crank on your DW735 has gone stiff or stopped moving, forcing it is how a cleaning job turns into a rebuild. Here is what is usually jamming...

Your DW735 Crank Got Hard to Turn. Stop Cranking.

Jan Schwarte

If the height crank on your DW735 has gone stiff or stopped moving, forcing it is how a cleaning job turns into a rebuild. Here is what is usually jamming...

Rounded-out Phillips screw head on a DW735 feed roller bracket

How to Break Loose the Stock DW735 Roller Brack...

Jan Schwarte

The four Phillips screws holding the DW735 feed roller brackets come from the factory brutally tight, and they round out on the first try. Here is the pinch method that...

How to Break Loose the Stock DW735 Roller Brack...

Jan Schwarte

The four Phillips screws holding the DW735 feed roller brackets come from the factory brutally tight, and they round out on the first try. Here is the pinch method that...

Planed board with snipe visible at the leading end

Why Did My Snipe Move to the Front of the Board?

Jan Schwarte

You fixed the snipe at the trailing end and now it shows up at the leading end instead. Nothing new has gone wrong. You shifted the balance between the two...

Why Did My Snipe Move to the Front of the Board?

Jan Schwarte

You fixed the snipe at the trailing end and now it shows up at the leading end instead. Nothing new has gone wrong. You shifted the balance between the two...

Snipe on a pine board from a planer that ran clean when it was new

My Planer Did Not Used to Snipe. Why Now?

Jan Schwarte

A planer that ran clean for the first year and started sniping later has not broken. Several things drift with use, they all push in the same direction, and most...

My Planer Did Not Used to Snipe. Why Now?

Jan Schwarte

A planer that ran clean for the first year and started sniping later has not broken. Several things drift with use, they all push in the same direction, and most...

Pine board measurably thinner at the end after passing through a planer

The Ends of My Boards Come Out Thinner. What Is...

Jan Schwarte

If the first and last few inches of every board come out of your planer slightly thinner than the middle, there is a name for that and it is not...

The Ends of My Boards Come Out Thinner. What Is...

Jan Schwarte

If the first and last few inches of every board come out of your planer slightly thinner than the middle, there is a name for that and it is not...

Diagram showing where a pressure bar sits on a planer and why the DW735 has none

The DW735 Has No Pressure Bar. Here Is What Tha...

Jan Schwarte

The most technically serious argument against ever fixing snipe on this machine is that it has no pressure bar. The premise is correct. The conclusion does not follow, and the...

The DW735 Has No Pressure Bar. Here Is What Tha...

Jan Schwarte

The most technically serious argument against ever fixing snipe on this machine is that it has no pressure bar. The premise is correct. The conclusion does not follow, and the...