Planer Snipe

Your DW735 does not dip because you fed the board wrong. It dips because the machine flexes when only one roller is holding the work. The Fix Kit caps that flex. After setup, customers measure 1 to 2 thousandths where they used to have a gouge deep enough to sand out or saw off.

• Free Shipping
• Fits DW735 and DW735X
• 20 to 40 minutes to install. No drilling. Fully reversible.

Customer result: 1-2 thousandths of snipe

"I make close-tolerance wooden interlocking puzzles from premium exotic woods, working to a few thousandths of an inch, so every inch of snipe cost me real money. My DW735X had snipe from day one and I tried every trick for 5 years before giving up and buying a floor-standing planer. With the Fix Kit dialed in, snipe is nearly undetectable, maybe 1-2 thousandths. A night and day difference. Very simple solution to a complex problem. I was ready to sell the DeWalt; instead it's now set up as my dedicated final-dimensioning machine."Mark McCallum, puzzle maker

Customer result: 0.1mm along the whole board

"I bought the kit as insurance since I already used proper technique. After install, infeed snipe was completely gone with just a trace on the outfeed side. One small front-roller adjustment later, I measured 0.1mm variation along the entire board with no technique at all. No board lifting, nothing. Thanks for the research, the excellent technical support, and for making this product available."Walter C., Florida